Toshiba VP 300, Installation Instructions Manual

Page: 591 / 614

LINK INDEPENDENT
The following independent pegs are listed by the LIST INTEGRATION
command.
PEG NAME DESCRIPTION
1 REPLY ERROR Number of times the MIC timed out
waiting for the VP 300 to process a
reply.
2 REQUEST ERROR Number of times the MIC firmware
received an invalid request.
LINK DEPENDENT PEGS
The following link-dependent pegs are listed by the LIST
INTEGRATION command. Each link has its own pegs.
PEG NAME DESCRIPTION
1 DEAD ERROR Number of times the MIC link was
dead.
2 INIT PROC ERROR Number of times the MIC link had to
retry part of its initialization procedure.
3 VCU CTRL ERROR Number of times the MIC link’s call
processing routine saw an unexpected
VCU control event.
4 GLARE COUNT Number of times that the VP 300 went
off-hook on this port to make an outcall
and the MIC firmware saw a call come
in at the same time.
5 MSG WT ERROR Number of times the MIC detected an
error while trying to control a message
waiting indicator. This does not include
Message Waiting Not Configured or
Message Waiting Not Able to Make.
6 SOURCE ERROR Number of times the MIC firmware
could not identify the source of a call.
7 DEST ERROR Number of times the MIC firmware
could not identify the destination of a
forwarded call.
9 MSG WT NOT Number of times the MIC made a call
CONFIGURED to toggle a message waiting indicator
and could not identify the status of the
indicator.
10 RESEND ERROR Number of times the firmware saw no
response to a keypress after a timeout
and had to resend the keypress.
Toshiba VP Systems Release 6.1 February, 1993
MITEL SX-2000 ADAPTIVE INTEGRATION 10.3-49