Toshiba VP 300 Installation Instructions Manual Download Page 344

Page: 344 / 614

■

Restoring a Name to a Different Mailbox for Release 7.1 or Later

The following is an example of restoring network names. This section applies to Release 7.1 and later.

Action

VP 300 Description and Response

@FLOPPY

The following menu is displayed:

The following is displayed:

- - - - - - - - - - RESTORE OF LOCAL NAMES- - - - - - - - - -

(1-8 DIGITS, ALL, EMPTY LINE = DONE)
:

Enter

- - - - - - - - - - RESTORE NAMES - - - - - - - - - -

LOCAL NAMES

NETWORK NAMES

ALL NAMES

SELECT NAME OPTION (1 – 3, EMPTY LINE = DONE).
:

Enter

- - - - - - - - - - RESTORE - - - - - - - - - -

NAMES.

GREETINGS.

SCRIPT AND SEQUENTIAL MESSAGES.

PERSONAL-DISTRIBUTION-LIST NAMES.

PROMPTS.

ALL NAMES, GREETINGS, SCRIPT AND SEQUENTIAL MESSAGES,
PERSONAL-DISTRIBUTION-LIST NAMES.

SELECT RESTORE OPTION (1 – 6, EMPTY LINE = DONE).
:

Enter

BACKUP

RESTORE

FLOPPY DIRECTORY

SELECT FLOPPY OPTION (1 – 3, EMPTY LINE = EXIT).
:

Enter

Toshiba VP Systems Release 7.1

July, 1994

6-30

Installation and Maintenance Manual

Summary of Contents for VP 300







































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VP 300

Reviews:

Related manuals for VP 300

Brands by name

Popular brands

Toshiba VP 300, Installation Instructions Manual

Search results

Summary of Contents for VP 300

Reviews:

Related manuals for VP 300

Brands by name

Popular brands