Toshiba VP 300, Installation Instructions Manual

Page: 167 / 614

Command Basic Definition
PRT x PRINT TONE
Monitors and prints DTMF tones dialed by the caller, the DTMF tones dialed out
by the VP 300 port, and the call progress tones from the PBX to the terminal.
This command is a real-time command and can be initiated on only one port at a
time. The information is not stored.
x is the port to monitor.
☞
To exit the monitor mode, press .
Below is the list of the type of messages that can be displayed when the PRT
command is initiated.
ANSWER The Toshiba VP System detected that the called party
answered the telephone.
NO ANSWER The Toshiba VP System determined that the called
party did not answer within the specified time period.
SLOW BUSY Reorder tone from the PBX or central office was
detected.
FAST BUSY Reorder tone from the PBX or central office was
detected.
VACANT EXT. Solid dial tone from the PBX or central office was
detected.
FLASH The Toshiba VP System performed a hook switch.
NO DIAL TONE The Toshiba VP System did not receive PBX or
central office dial tone.
EXPECT DIAL TONE The Toshiba VP System is configured to expect PBX
or central office dial tone.
IN—x x is the incoming digit entered by the caller.
DIAL—x x is the digits being sent by the Toshiba VP System.
T ON The Toshiba VP System is reporting tone was
received from the PBX or central office. The number
displayed is the actual time duration of the tone
received.
T OFF The Toshiba VP System is reporting no tone (silence)
received from the PBX or central office. The number
displayed is the actual time duration that no tone was
present.
PRTMAP LIST PORT MAPPING
Lists allocation of system port numbers to ports configured in each slot, and
displays the allocation of each port to integration unit.
P S x PORT STATUS
Prints the status of all ports.
x = Non-zero for continuous (optional)
Escape
Toshiba VP Systems Release 7.1 July, 1994
MAINTENANCE
5-9