Toshiba VP 300, Installation Instructions Manual

Page: 180 / 614

■
Alarm Test
To test the alarm call-out feature, at the @ prompt, enter:
TEST ALARM (or TE A)
The test attempts to call the string entered during INSTALL, System Parameter 31 — ALARM
NUMBER. If successful, the person answering the alarm call hears the following:
"Beep-Beep-Beep-Beep. This is an alarm call from Voice System number 123. Error type X has
occurred. Press star to acknowledge alarm notification or press pound to connect to the modem."
If not acknowledged, the call disconnects after one minute and retries every ten minutes until
acknowledged (press
*
).
To logon, proceed as follows:
•
Press
#
. The line Beeps for up to three minutes allowing time to connect the modem and
terminal.
•
Press
#
when ready. This connects the modem, enabling remote access to the VP 300.
☞
If a second
#
is not entered, the call disconnects and continues to retry every ten minutes
until acknowledged.
List the Hardware Error Table after testing the alarm or enabling remote access. At the @ prompt,
enter:
L H
Enter
Enter
Toshiba VP Systems Release 7.1 July, 1994
5-22 Installation and Maintenance Manual
Table 5-1 Abbreviations for Channel/Port State
Port State Description
OMC
QAD
QCK
PAC
PDL
RDY
RNM
STR
TST
VMR
VMS
WFA
WFD
DIG
OFFSITE MESSAGE WAITING CONFIGURATION
COLLECTING AN ADDRESS FOR A QUICK MESSAGE
RECORDING A QUICK MESSAGE OR MESSAGE AFTER CALL
PERSONAL ASSISTANCE CONFIGURATION
PERSONAL DISTRIBUTION LISTS
WAITING FOR COMMAND AT READY
USER RECORD OWN NAME
START OF INITIAL LOGON BEFORE READY
SELFTEST IN PROGRESS OR PORT HAS FAILED SELFTEST
VP NET MESSAGE RECEIVED - PROTOCOL 2 (Not used)
VP NET MESSAGE SEND - PROTOCOL 2 (Not used)
WAITING FOR MAILBOX ADDRESS AFTER RECEIVING #
WAITING FOR FIRST DIGIT AFTER ANSWERING CALL
IN-BAND DTMF INTEGRATION
NTS
NET TEST STATE
SCR
SCRIPTED GREETING
SLQ
SELECT MESSAGE QUEUE