Toshiba VP 300, Installation Instructions Manual

Page: 587 / 614

I. Press
3
to erase the message. Press
9
to exit the mailbox. Does the VP 300 respond
with “One message will be erased…”? Press
9
to exit the system. Does the VP 300
respond with “Good-bye…”?
NO
➧
Determine the cause and correct the problem before continuing.
J. Hang up phone B. Is the message waiting indicator turned OFF?
NO
➧
Determine the cause and correct the problem before continuing.
☞
It may take several seconds for the indicator to turn OFF.
12B.
MESSAGE WAITING FOR SYSTEMS NOT USING THE VP 300 TO CONTROL
MESSAGE WAITING INDICATION
This test verifies correct operation of message waiting notification for systems not
using the SX-2000 feature access codes to control message waiting indicators.
A. Set phone B to forward to the VP 300 on a busy condition by dialing the feature access
code for Call Forwarding – Busy followed by the VP 300 access number. After setting
forwarding for phone B, leave phone B off-hook so that it appears busy.
B. From phone A, call out and back in on a trunk that auto-terminates to the VP 300.
C. Does the VP 300 answer properly?
NO
➧
Determine the cause and correct the problem before continuing.
☞
If the VP 300 is equipped with IntraMessaging, you may prefer to use the Quick
Message feature to leave a message for phone B instead of following the
instructions of step D and step E.
D. Dial the extension number of phone B. After the duration specified by the PBX System
Option for Call Forwarding Don’t Answer Time-out, the VP 300 should respond,
“Extension EXT-B is in use. Please leave a private message at the tone, dial another
extension number, or dial zero for assistance…”
E. Leave a test message for phone B. While recording the message, put phone B back
on-hook.
☞
A message is not delivered to a mailbox unless it is at least 4.5 seconds in
length. The mailbox for phone B must be entered in the VP 300 USER Table or
the VP 300 does not offer to take a message
F. The VP 300 should now initiate a message waiting notification call to phone B. Does
the VP 300 call the extension associated with phone B?
NO
➧
Determine the cause and correct the problem before continuing.
G. From phone B, call the VP 300 and enter the mailbox number of mailbox B. The VP
300 should respond with “EXT-B has one message. Ready…”
H. Listen to the test message. Does the message sound clear?
NO
➧
Determine the cause and correct the problem before continuing.
Toshiba VP Systems Release 6.1 February, 1993
MITEL SX-2000 ADAPTIVE INTEGRATION 10.3-45