Toshiba VP 300, Installation Instructions Manual

Page: 475 / 614

A. Connect the Superset 4 to the MIC port used for MWI and wait for the PBX to
initialize the Superset 4.
B. Go off-hook on the Superset 4 and dial the extension number of phone B. Does phone
B ring?
NO
➧
Determine the cause and correct the problem before continuing.
C. Once phone B starts ringing, does softkey 4 of the Superset have the SEND MSG
prompt?
NO
➧
Determine the cause and correct the problem before continuing.
Possible causes may be that the Superset 4 is not configured as a sub-attendant (COS
Option 606) or that phone B is not configured for lamp message waiting (COS Option
232).
D. Press the SEND MSG softkey. Does the Superset 4 return dial tone? Is the Phone B
message waiting indicator ON?
NO
➧
Determine the cause and correct the problem before continuing.
E. From the Superset 4, dial the extension number of phone B again. Once phone B is
ringing, does softkey 4 of the Superset have the MSG prompt?
NO
➧
Determine the cause and correct the problem before continuing.
F. Press the MSG softkey. Does the Superset 4 return dial tone? Is the phone B message
waiting indicator OFF?
NO
➧
Determine the cause and correct the problem before continuing.
G. Hang up the Superset 4. Using phone A, call the Superset 4. Does the PBX return
reorder tone? If not, check that the COS for MWI has Option 235, ORIGINATE
ONLY, enabled. Correct the problem before continuing.
H. Hang up phone A.
7B.
MWI Test With COV Voice Mail Feature
This test verifies that a message waiting indicator can be set and cleared using the
Superset 4 COV Voice Mail feature.
A. Connect the Superset 4 to the MIC port used for MWI and wait for the PBX to
initialize the Superset 4.
B. Press the selected feature button on the Superset 4. The display should read:
NO
➧
Determine the cause and correct the problem before continuing.
C. Press
4
on the keypad. Does the display clear?
NO
➧
Determine the cause and correct the problem before continuing.
D. Dial the extension number of phone B. Does softkey 4 of the Superset 4 have the
SEND MSG prompt?
NO
➧
Determine the cause and correct the problem before continuing.
DIAL FEATURE NO.
Toshiba VP Systems Release 7.1 July, 1994
MITEL SX-200 DIGITAL ADAPTIVE INTEGRATION 10.1-31