manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 58

Operating the Instrument

R&S

®

ESW

58

User Manual 1177.6298.02 ─ 08

Hiding elements in the display

You can hide some of the elements in the display, for example the status bar or chan-
nel bar, to enlarge the display area for the measurement results ("Setup" > "Display" >
"Displayed Items").
For details, see the R&S

 

ESW user manual.

●

Channel Bar

............................................................................................................ 58

●

Window Title Bar

..................................................................................................... 60

●

Marker Information

..................................................................................................61

●

Frequency and Span Information in Diagram Footer

..............................................62

●

Instrument and Status Information

..........................................................................62

●

Error Information

..................................................................................................... 63

6.1.1

 

Channel Bar

Using the R&S

 

ESW you can handle several different measurement tasks (channels)

at the same time (although they can only be performed asynchronously). For each
channel, a separate tab is displayed on the screen. To switch from one channel display
to another, simply select the corresponding tab.

If many tabs are open, you can also select the tab selection list icon at the right end of
the channel bar and select the channel you want to see.

MultiView tab

An additional tab labeled "MultiView" provides an overview of all active channels at a
glance. In the "MultiView" tab, each individual window contains its own channel bar
with an additional button. Tap this button to switch to the corresponding channel dis-
play quickly.

Icons in the channel bar

The star icon ( ) on the tab label indicates that the displayed trace no longer matches
the current instrument settings. This can be the case, for example, if a trace is frozen
and the instrument settings are changed. When a new measurement is performed, the
icon disappears.

The exclamation mark icon ( ) indicates that an error or warning is available for that
measurement channel. This is particularly useful if the MultiView tab is displayed.

Understanding the Display Information

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands