manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 732

Troubleshooting

R&S

®

ESW

732

User Manual 1177.6298.02 ─ 08

Packing and transporting the instrument

If the instrument needs to be transported or shipped, observe the notes described in

Chapter 4.1.1, "Unpacking and Checking the Instrument"

, 

on page 22.

17.7

 

Contacting Customer Support

Technical support – where and when you need it

For quick, expert help with any Rohde

 

&

 

Schwarz equipment, contact one of our Cus-

tomer Support Centers. A team of highly qualified engineers provides telephone sup-
port and will work with you to find a solution to your query on any aspect of the opera-
tion, programming or applications of Rohde

 

&

 

Schwarz equipment.

Up-to-date information and upgrades

To keep your instrument up-to-date and to be informed about new application notes
related to your instrument, please send an e-mail to the Customer Support Center stat-
ing your instrument and your wish. We will take care that you will get the right informa-
tion.

Europe, Africa, Middle East

Phone +49 89 4129 12345

[email protected]

North America

Phone 1-888-TEST-RSA (1-888-837-8772)

[email protected]

Latin America

Phone +1-410-910-7988

[email protected]

Asia/Pacific

Phone +65 65 13 04 88

[email protected]

China

Phone +86-800-810-8228 / +86-400-650-5896

[email protected]

Contacting Customer Support

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands