Rohde & Schwarz ESW Series, User Manual

Page: 285 / 759

Data Management
R&S
®
ESW
285 User Manual 1177.6298.02 ─ 08
"Clipboard" Copies the printout to the clipboard. Since only single pages can be
copied, only screenshots can be copied to this destination, not multi-
ple windows (see
Chapter 12.6.1.1, "Print Content Settings" ,
on page 280). Page settings are not available; however, you can con-
figure the colors used for the screenshot (see
Chapter 12.6.1.5, "Print
Color Settings" , on page 287).
If you select the clipboard as the printing destination, the content set-
ting is automatically set to
Print Screenshot .
"Printer" Sends the printout to the printer selected from the Printer Name list.
Remote command:
HCOPy:DESTination<1|2>
on page 597
HCOPy:DEVice:LANGuage<1|2>
on page 597
Suppress File Name Dialog
If the Destination is a file, the file selection dialog box is not displayed. Instead, the
default storage location and filename are used.
(C:\R_S\Instr\User
\ESW_ScreenShot_<date and time>
).
Printer Name
Defines the printer to print to if a printer is selected as the Destination .
Any printers detected in the network are listed for selection.
Tip : the printout can also be stored in a print file using the selected printer driver, see
"Print to file" on page 285.
Remote command:
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
on page 603
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
on page 603
SYSTem:COMMunicate:PRINter:SELect<1|2>
on page 604
Print to file
If a printer is selected as the Destination , use this option to store the data in a
.prn
file
using the selected printer driver.
Install Printer
This softkey opens the standard Windows dialog box to install a new printer. All print-
ers that are already installed are displayed.
Only user accounts with administrator rights can install a printer.
For further information, refer to the Microsoft Windows documentation.
12.6.1.4 Page Setup
Access : "Print" > "Print Config" > "Page Setup" tab
Creating Screenshots of Current Measurement Results and Settings