manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 90

Applications

R&S

®

ESW

90

User Manual 1177.6298.02 ─ 08

To deactivate a channel, simply close the corresponding tab.

New Channel

.................................................................................................................90

Replace Current Channel

..............................................................................................90

Duplicate Current Channel

............................................................................................90

New Channel

The applications selected on this tab are started in a new measurement channel, i.e. a
new tab in the display.

Remote command: 

INSTrument:CREate[:NEW]

 

on page 436

INSTrument[:SELect]

 

on page 438

Replace Current Channel

The applications selected on this tab are started in the currently displayed measure-
ment channel, replacing the current application.

Remote command: 

INSTrument:CREate:REPLace

 

on page 436

Duplicate Current Channel

The currently active channel can be duplicated, i.e. a new channel of the same type
and with the identical measurement settings is started. The name of the new channel is
the same as the copied channel, extended by a consecutive number (e.g. "Spectrum" -
> "Spectrum 2").

Remote command: 

INSTrument:CREate:DUPLicate

 

on page 436

8.4

 

Running a Sequence of Measurements

Only one measurement can be performed at any time, namely the one in the currently
active channel. However, in order to perform the configured measurements consecu-
tively, a Sequencer function is provided.

●

The Sequencer Concept

......................................................................................... 90

●

Sequencer Settings

.................................................................................................93

●

How to Set Up the Sequencer

.................................................................................93

8.4.1

 

The Sequencer Concept

The instrument can only activate one specific channel at any time. Thus, only one
measurement can be performed at any time, namely the one in the currently active
channel. However, in order to perform the configured measurements consecutively, a
Sequencer function is provided, which changes the channel of the instrument as

Running a Sequence of Measurements

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands