manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 414

Network and Remote Operation

R&S

®

ESW

414

User Manual 1177.6298.02 ─ 08

► In the web browser, open the 

http://<instrument-hostname>

 or 

http://

<instrument-ip-address>

 page, e.g. 

http://10.113.10.203

.

The default password to change LAN configurations is 

LxiWebIfc

.

The "Instrument Home Page" (welcome page) opens.

The instrument home page displays the device information required by the LXI stan-
dard including the VISA resource string in read-only format.

► Press the "Device Indicator" button on the "Instrument Home Page" to activate or

deactivate the LXI status icon on the status bar of the R&S

 

ESW. A green LXI sta-

tus symbol indicates that a LAN connection has been established; a red symbol
indicates an error, for example, that no LAN cable is connected. When a device is
connecting to the instrument, the LXI logo blinks. The "Device Indicator" setting is
not password-protected.

The most important control elements in the navigation pane of the browser interface
are the following:

●

"LAN Configuration" opens the menu with configuration pages.

●

"Status" displays information about the LXI status of the instrument.

●

"Help > Glossary" opens a document with a glossary of terms related to the LXI
standard.

LAN Configuration

The LAN configuration consists of three parts:

●

"IP configuration" provides all mandatory LAN parameters.

●

"Advanced LAN Configuration" provides LAN settings that are not declared manda-
tory by the LXI standard.

How to Set Up a Network and Remote Control

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands