manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 360

Network and Remote Operation

R&S

®

ESW

360

User Manual 1177.6298.02 ─ 08

The simplest way to establish socket communication is to use the built-in telnet pro-
gram. The telnet program is part of every operating system and supports a communi-
cation with the software on a command-by-command basis. For more convenience and
to enable automation by means of programs, user-defined sockets can be program-
med.

Socket connections are established on a specially defined port. The socket address is
a combination of the IP address or the host name of the instrument and the number of
the port configured for remote-control. All R&S

 

ESW use port number 5025 for this pur-

pose. The port is configured for communication on a command-to-command basis and
for remote control from a program.

LXI Web Browser Interface

LAN eXtensions for Instrumentation (LXI) is an instrumentation platform for measuring
instruments and test systems that is based on standard Ethernet technology. LXI is
intended to be the LAN-based successor to GPIB, combining the advantages of Ether-
net with the simplicity and familiarity of GPIB. The LXI browser interface allows for
easy configuration of the LAN and remote control of the R&S

 

ESW without additional

installation requirements.

The instrument's LXI web browser interface works correctly with all W3C compliant
browsers.

Via the LXI browser interface to the R&S

 

ESW you can control the instrument remotely

from another PC. Manual instrument controls are available via the front panel simula-
tion. File upload and download between the instrument and the remote PC is also
available. Using this feature, several users can access 

and operate

 the R&S

 

ESW

simultaneously. This is useful for troubleshooting or training purposes.

For details, see 

Chapter 14.5.1.4, "How to Configure the LAN Using the LXI Web

Browser Interface"

, 

on page 413 and 

Chapter 14.5.5, "How to Control the R&S

 

ESW

via the Web Browser Interface"

, 

on page 419.

If you do not want other users in the LAN to be able to access and operate the
R&S

 

ESW you can deactivate this function.

See 

Chapter 14.5.6, "How to Deactivate the Web Browser Interface"

, 

on page 420.

Restrictions

Only user accounts with administrator rights can use the LXI functionality.

To display the LXI web browser interface

► In the address field of the browser on your PC, type the host name or IP address of

the instrument, for example: 

http://10.113.10.203

.

The instrument home page (welcome page) opens.

Remote Control Basics

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands