manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 79

Operating the Instrument

R&S

®

ESW

79

User Manual 1177.6298.02 ─ 08

► To change the size of two neighboring windows, drag the splitter between the win-

dows in either direction.

6.5.4

 

Switching Between a Split and Maximized Window Display

To get an overview of the results, displaying several windows at the same time may be
helpful. However, the individual windows may become rather small. In this case it is
useful to maximize an individual window to the entire screen temporarily in order to
analyze the results in more detail.

To switch between a split and a maximized display without having to close and re-open
windows, press the [SPLIT/MAXIMIZE] key on the front panel. In maximized display,
the currently focused window is maximized. In split display, all active windows are dis-
played.

Alternatively, double-tap the title bar of a window to maximize it.

6.5.5

 

Changing the Display

The display can be optimized for your individual needs. The following display functions
are available and are described in detail in 

Chapter 13.2, "Display Settings"

,

on page 305 and 

Chapter 11.1, "Result Display Configuration"

, 

on page 190.

●

Displaying a simulation of the entire front panel of the instrument on the screen
("Front Panel")

●

Displaying the main function hardkeys in a separate window on the screen ("Mini
Front Panel")

●

Hiding or showing various screen elements

●

Selecting a display theme and colors

●

Changing the display update rate

●

Activating or deactivating the touch-sensitivity of the screen

●

Zooming into the diagram

6.6

 

Getting Help

If any questions or problems concerning the R&S

 

ESW arise, an extensive online help

system is provided on the instrument and can be consulted at any time. The help sys-
tem is context-sensitive and provides information specifically for the current operation
or setting to be performed. In addition, general topics provide an overview on complete
tasks or function groups as well as background information.

Getting Help

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands