manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 68

Operating the Instrument

R&S

®

ESW

68

User Manual 1177.6298.02 ─ 08

You can hide the softkey display, e.g. when using remote control, in order to enlarge
the display area for the measurement results ("Setup > Display > Displayed Items").
See the User Manual for details.

6.2.3

 

Context Menus

Several items in the diagram area have context-sensitive menus (for example markers,
traces or the channel bar). If you right-click on one of these items (or tap it for about 1
second), a menu is displayed which contains the same functions as the corresponding
softkey. This is useful, for example, when the softkey display is hidden.

6.2.4

 

On-screen Keyboard

The on-screen keyboard is an additional means of interacting with the instrument with-
out having to connect an external keyboard.

The on-screen keyboard display can be switched on and off as desired using the "On-
Screen Keyboard" function key beneath the screen.

Accessing Functions

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands