Remote Commands in the Receiver Application
R&S
®
ESW
450
User Manual 1177.6298.02 ─ 08
TRACe<n>:POINts
<LIMit>, <Points>
This command defines the maximum number of measurement points that are transfer-
red in one block after using
TRAC? SCAN
.
The total number of bytes which is transferred depends on the number of active traces.
Suffix:
<n>
.
irrelevant
Parameters:
<LIMit>
<Points>
Range:
1 to 10000
*RST:
1000
Example:
//Transfer a maximum of 8000 measurement values per trace
with a single query
TRAC:POIN LIM, 8000
15.5.4
Bargraph Configuration
..................................................................................450
.................................................................................. 450
.................................................................................. 451
DISPlay:BARGraph:PHOLd[:STATe]
.................................................................................451
DISPlay:BARGraph:TCOupling[:STATe]
............................................................................451
[SENSe:]DETector<t>:RECeiver[:FUNCtion]
..................................................................... 451
DISPlay:BARGraph:LEVel:LOWer?
This command queries the level range of the bargraph.
Return values:
<Level>
Lowest level displayed on the bargraph scale.
Default unit: depends on the selected unit
Example:
//Query bargraph minimum level
DISP:BARG:LEV:LOW?
would return, e.g.
10
Usage:
Query only
DISPlay:BARGraph:LEVel:UPPer?
This command queries the level range of the bargraph.
Return values:
<Level>
Highest level displayed on the bargraph scale.
Default unit: depends on the selected unit
Measurements and Result Displays
