Common Measurement Settings
R&S
®
ESW
143
User Manual 1177.6298.02 ─ 08
The advantage of the fast access panel is that it is easier and faster to change various
settings in a single panel without having to find and access dialog boxes or softkey
menus first. In addition, you can still view results while changing parameters, without
dialog boxes blocking the view.
Example: Steps necessary to change the attenuation without the fast access
panel
1. Press the [AMPT] key.
2. Press the "Ampt Config" softkey.
3. Select the "Attenuation" parameter.
4. Turn the rotary knob or enter the attenuation manually to change the attenuation.
When you want to change the attenuation again, you have to repeat that proce-
dure. Plus, almost the whole time, the result displays are blocked by a dialog box.
5. (...)
Example: Steps necessary to change the attenuation when you have assigned
that parameter to the fast access panel
1. Add the fast access panel to the user interface.
2. Use the cursor keys in the panel to increase or decrease the attenuation.
When you want to change the attenuation again, simply hit the "Up" or "Down" key.
Plus, you are able to see the results all the time.
Note:
The parameter stepsize of the knobs is the same as if you were using the
cursor keys.
The fast access panel carries a few predefined settings. However, you can substitute
the predefined settings, or add a few more, and thus define the contents of the fast
access panel as you like.
Assigning functions to the fast access panel
1. Tap one of the interfaces to configure knobs in the user interface.
Using the Fast Access Panel
