manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 160

Common Measurement Settings

R&S

®

ESW

160

User Manual 1177.6298.02 ─ 08

Generator Type

Selects the generator type and thus defines the generator setup file to use.

For an overview of supported generators, see 

"Overview of Supported Generators"

on page 154. For information on generator setup files, see 

"Generator Setup Files"

on page 155.

Remote command: 

SYSTem:COMMunicate:RDEVice:GENerator<gen>:TYPE

 

on page 493

Interface

Type of interface connection used.

For details on which signal generators support which interfaces, see the documenta-
tion of the corresponding signal generator.

●

GPIB

●

TCP/IP

Remote command: 

SYSTem:COMMunicate:RDEVice:GENerator<gen>:INTerface

 

on page 492

TTL Handshake

If available for the specified generator type, this option activates TTL synchronization
via handshake.

Using the TTL interface allows for considerably higher measurement rates, because
the frequency stepping of the R&S

 

ESW is directly coupled with the frequency stepping

of the generator.

For more information on TTL synchronization, see 

"TTL synchronization"

 

on page 156.

For an overview of which generators support TTL synchronization see 

"Overview of

Supported Generators"

 

on page 154.

Remote command: 

SYSTem:COMMunicate:RDEVice:GENerator<gen>:LINK

 

on page 492

GPIB Address/TCPIP Address / Computer Name

For LAN connections: TCP/IP address of the signal generator

For GPIB connections: GPIB address of the signal generator.

Remote command: 

SYSTem:COMMunicate:GPIB:RDEVice:GENerator<gen>:ADDRess

 

on page 492

SYSTem:COMMunicate:TCPip:RDEVice:GENerator<gen>:ADDRess

on page 493

Reference

Selects the internal R&S

 

ESW or an external frequency reference to synchronize the

R&S

 

ESW with the generator (default: internal).

Remote command: 

SOURce<si>:EXTernal<gen>:ROSCillator[:SOURce]

 

on page 490

Edit Generator Setup File

Displays the setup file for the currently selected 

Generator Type

 in read-only mode in

an editor.

Data Input and Output

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands