manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 336

General Instrument Setup

R&S

®

ESW

336

User Manual 1177.6298.02 ─ 08

Remote commands:

SYSTem:FORMat:IDENt

 

on page 671

DIAGnostic:SERVice:BIOSinfo?

 

on page 668

DIAGnostic:SERVice:VERSinfo?

 

on page 669

Open Source Acknowledgment: Open

Displays a PDF file containing information on open source code used by the R&S

 

ESW

firmware.

Install Option

Opens an edit dialog box to enter the license key for the option that you want to install.

Only user accounts with administrator rights are able to install options.

Install Option by XML

Opens a file selection dialog box to install an additional option to the R&S

 

ESW using

an XML file. Enter or browse for the name of an XML file that contains the option key
and select "Select".

"File Explorer": Instead of using the file manager of the R&S

 

ESW firmware, you can

also use the Microsoft Windows File Explorer to manage files.

Only user accounts with administrator rights are able to install options.

13.5.3

 

System Messages

Access

: [Setup] > "System Configuration" > "System Messages"

The system messages generated by the R&S

 

ESW are displayed.

The messages are displayed in the order of their occurrence; the most recent mes-
sages are placed at the top of the list. Messages that have occurred since you last vis-
ited the system messages tab are marked with an asterisk '*'.

If the number of error messages exceeds the capacity of the error buffer, "Message
Buffer Overflow" is displayed. To clear the message buffer use the "Clear All Mes-
sages" button.

The following information is available:

System Configuration Settings

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands