Network and Remote Operation
R&S
®
ESW
425
User Manual 1177.6298.02 ─ 08
The options for configuring the R&S
ESW screen display are displayed.
11. Under "Remote desktop size", you can set the size of the R&S
ESW window on the
desktop of the controller.
12. Under "Colors", do not change the settings.
13. Set the "Display the connection bar when I use the full screen" option:
● If activated, a bar showing the network address of the R&S
ESW will appear at
the top edge of the screen. You can use this bar to reduce, minimize or close
the window.
● If deactivated, the only way you can return to the controller desktop from the
R&S
ESW screen in full screen mode is to select "Disconnect" from the "Start"
menu.
14.5.7.3
How to Start and Close the Remote Desktop
To set up a connection to the R&S
ESW
1. In the "Remote Desktop Connection" dialog box (see
on page 423), open the "General" tab.
2. In the "Computer" field, enter the IP address of the R&S
ESW.
In the "User name" field, enter
instrument
to log in as an administrator, or
Normal
User
to log in as a standard user.
In the "Password" field, enter
894129
.
3. To save the connection configuration for later use:
a) Select the "Save As" button.
The "Save As" dialog box is displayed.
b) Enter the name for the connection information (
*.RDP
).
4. To load an existing connection configuration:
a) Select the "Open" button.
The "Open" dialog box is displayed.
b) Select the
*.RDP
file.
5. Select the "Connect" button.
The connection is set up.
6. If the "Disk drives" option is activated on the "Local Resources" tab, a warning is
displayed indicating that the drives are enabled for access from the R&S
ESW.
Select "OK" to confirm the warning.
7. After a few moments, the R&S
ESW screen is displayed.
If a dark screen appears or a dark square appears in the upper left-hand corner of
the screen, you must restart the R&S
ESW in order to see the modified screen res-
olution.
How to Set Up a Network and Remote Control
