manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 46

Instrument Tour

R&S

®

ESW

46

User Manual 1177.6298.02 ─ 08

5.1.2

 

Power Key

The Power key on the front panel turns the instrument on and off.

The color of the LED above the key shows its current state.

●

Orange: instrument is in stand-by mode.

●

Green: instrument is running.

For more information see 

Chapter 4.1.5, "Switching the Instrument On and Off"

,

on page 25.

5.1.3

 

System Control Keys

System control keys provide access to the basic instrument configuration.

Refer to the User Manual for an extensive description of the system configuration func-
tionality.

Resets the instrument to its default configuration.

Selects a particular measurement application or operating mode.

Provides functionality to configure basic instrument characteristics, for example:

●

the LAN connection

●

the date and time

●

the display configuration

●

the reference frequency

●

firmware update and application installation

●

service functions

●

transducer configuration

●

configuration of the Fast Acces panel

Provides access to the on-screen keyboard.

Turns full screen mode on and off.

Selects a window in split screen mode or browses through active windows in full
screen mode.

5.1.4

 

USB Ports

The three USB ports on the front panel (type A) allow you to connect devices like key-
boards, mouses or memory sticks.

The Front Panel

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands