manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 89

Applications

R&S

®

ESW

89

User Manual 1177.6298.02 ─ 08

8.3

 

Starting an Application

Access

► [MODE] > "<application>"

The default application that is running when you start the R&S

 

ESW is the Receiver

application.

The remote commands required to perform these tasks are described in 

Chapter 15.4,

"Application Selection"

, 

on page 435.

The measurement channels are labeled with their default name. If that name already
exists, a sequential number is added.
You can define a different channel name by selecting (double-click) the corresponding
label.

In remote control, the name of the measurement channel can also be changed. For
details and an overview of default names see 

INSTrument:LIST?

 

on page 437.

Switching between applications

When you enter a new application, a set of parameters is passed on from the current
application to the new one, for example the measurement frequency or the attenuation.

You can also define a fix set of parameters that are synchronized between applica-
tions. For more information see 

Chapter 13.7, "Synchronizing Measurement Channel

Configuration"

, 

on page 347.

Starting an Application

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands