manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 595

Remote Commands in the Receiver Application

R&S

®

ESW

595

User Manual 1177.6298.02 ─ 08

Gui setting

Description

Remote command

"Screen Colors (Print)"

Selects the current screen colors for the
printout. The background is always printed in
white and the grid in black.

HCOP:CMAP:DEF1

"Optimized Colors"

Selects an optimized color setting for the
printout to improve the visibility of the colors
(default setting). Trace 1 is blue, trace 2
black, trace 3 green, and the markers are
turquoise. The background is always printed
in white and the grid in black.

HCOP:CMAP:DEF2

"User Defined Colors"

Selects the user-defined color setting.

HCOP:CMAP:DEF3

"Screen Colors
(Screenshot)"

Selects the current screen colors without any
changes for a screenshot.

HCOP:CMAP:DEF4

HCOPy:CMAP<it>:HSL 

<hue>, <sat>, <lum>

This command selects the color for various screen elements in print jobs.

Suffix: 

<it>

.

Selects the item for which the color scheme is to be defined.
For more information see 

Chapter 15.9.5.3, "CMAP Suffix

Assignment"

, 

on page 646.

Parameters:

<hue>

hue

tint
Range: 

0  to  1

<sat>

sat

saturation
Range: 

0  to  1

<lum>

lum

brightness
Range: 

0  to  1

Example: 

HCOP:CMAP2:HSL 0.3,0.8,1.0

Changes the grid color

Manual operation: 

See 

"Defining User-specific Colors"

 

on page 313

HCOPy:CMAP<it>:PDEFined 

<Color>

This command selects a predefined color for various screen elements in print jobs.

Suffix: 

<it>

.

1..n
Selects the item for which the color scheme is to be defined.
For more information see 

Chapter 15.9.5.3, "CMAP Suffix

Assignment"

, 

on page 646.

Data Management

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands