General Instrument Setup
R&S
®
ESW
348
User Manual 1177.6298.02 ─ 08
13.7.1
General Parameter Coupling
Access
: [SETUP] > "Parameter Coupling" > "General"
The "General" tab of the coupling manager contains several parameters that you can
couple across all (active) measurement channels - if the channel supports the corre-
sponding parameter.
When you couple a parameter across all active measurement channels, a change in
the currently selected application is passed on to all other active measurement chan-
nels.
Example:
You have opened one instance of the spectrum application, two instances of the
receiver application and one instance of the analog demodulation application.
The currently selected channel is the first receiver channel (as shown in the picture).
When you turn the coupling of the frequency on, changing the frequency in the
"Receiver" channel also changes the frequency in the "Spectrum", "Receiver 2" and
"Analog Demod" channels.
Synchronizing parameters across all measurement channels
....................................348
Selecting all or no coupling mechanisms
.................................................................... 350
Restoring the default configuration
............................................................................. 350
Synchronizing parameters across all measurement channels
To synchronize a specific parameter, turn on the corresponding function.
Synchronizing Measurement Channel Configuration
