Remote Commands in the Receiver Application
R&S
®
ESW
476
User Manual 1177.6298.02 ─ 08
<TraceNumber>,<Detector>,<Frequency>,<Level>,
<DeltaLimit>,<Comment>,...
<DeltaLimit>
is '0' if you use no limit line.
<comment>
is empty if you have not entered one for the corre-
sponding peak.
Example:
//Query peak information
CALC:FME:PLIS?
would return, e.g.
'TRACE1,Quasi-Peak,
4.5e+07,53.99,0,yahoo,TRACE2,Average,
4.5e+07,53.07,0,,TRACE3,RMS,
4.5e+07,50.89,0,,TRACE4,Quasi-Peak,
4.5e+07,53.99,0,,[...]'
Usage:
Query only
CALCulate<n>:FMEasurement:PLISt<pi>:COMMent
<Comment>
This command defines a comment for a peak measured in the final measurement.
Suffix:
<n>
.
irrelevant
<pi>
Parameters:
<Comment>
String that contains the comment.
Example:
//Define a comment for the fourth peak in the peak list
CALC:FME:PLIS4:COMM 'Woohoo'
CALCulate<n>:FMEasurement:PLISt<pi>:DELTa?
This command queries the distance of a peak to the nearest limit line in the final mea-
surement.
Suffix:
<n>
.
irrelevant
<pi>
Return values:
<Level>
<numeric value>
If you are using no limit line, the return value is '0'.
Default unit: dB
Example:
//Query distance of a peak to a limit line
CALC:FME:PLIS4:DELT?
//would return, e.g.
3.23
Usage:
Query only
Measurements and Result Displays
