manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 66

Operating the Instrument

R&S

®

ESW

66

User Manual 1177.6298.02 ─ 08

6.2.1

 

Toolbar

The icons in the toolbar provide access to general functions.

You can hide the toolbar display, for example when using remote control, in order to
enlarge the display area for the measurement results ("Setup > Display > Displayed
Items"). See the R&S

 

ESW User Manual for details.

Windows: opens the Windows "Start" menu and task bar.

Open: opens a file from the instrument or an external device ("Save/Recall" menu).

Store: stores data on the instrument or an external device ("Save/Recall" menu).

Print: defines print settings ("Print" menu).

Report Generator: opens the softkey menu to configure a report.

Undo: reverts last operation

Redo: repeats previously reverted operation

Select: the cursor can be used to select (and move) elements in the display (mark-
ers, lines etc.).

Zoom mode: displays a dotted rectangle in the diagram that can be expanded to
define the zoom area.

Multiple zoom mode: multiple zoom areas can be defined for the same diagram.

Zoom off: displays the diagram in its original size.

SmartGrid: activates "SmartGrid" mode to configure the screen layout.

Accessing Functions

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands