manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 424

Network and Remote Operation

R&S

®

ESW

424

User Manual 1177.6298.02 ─ 08

6. To improve the performance, you can deactivate the "Desktop background", "Show

contents of window while dragging" and "Menu and window animation" options.

7. Open the "Local Resources" tab for enabling printers, local drives and serial inter-

faces.

8. If you will need to access drives of the controller from the R&S

 

ESW (e.g. in order

to store settings or to copy files from the controller to the R&S

 

ESW), select "More",

then enable the "Drives" option.

Windows will then map drives of the controller to the corresponding network drives.

9. To use printers connected to the controller while accessing them from the

R&S

 

ESW, activate the "Printers" option. Do not change the remaining settings.

10. Open the "Display" tab.

How to Set Up a Network and Remote Control

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands