manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 421

Network and Remote Operation

R&S

®

ESW

421

User Manual 1177.6298.02 ─ 08

6. Set "Startup type" to "Disabled".

7. Select "Stop".

8. Select "Apply".

The next time a user enters the IP address of the instrument in a web browser, an
error message is displayed:

Failed to connect to server (code. 1006)

14.5.7

 

How to Set Up Remote Desktop

Remote Desktop is a Windows application which can be used to access and control
the instrument from a remote computer through a LAN connection. While the instru-
ment is in operation, the instrument screen contents are displayed on the remote com-
puter, and Remote Desktop provides access to all of the applications, files, and net-
work resources of the instrument. Thus, remote operation of the R&S

 

ESW is possible.

With Microsoft Windows, Remote Desktop Client is part of the operating system. For
other versions of Windows, Microsoft offers the Remote Desktop Client as an add-on.
For details refer to the Microsoft Windows operating system documentation.

14.5.7.1

 

How to Configure the R&S

 

ESW for Remote Operation via Remote Desktop

1. Create a fixed IP address for the TCP/IP protocol as described in 

Chapter 14.5.1.2,

"How to Assign the IP Address"

, 

on page 411.

Note: 

To avoid problems, use a fixed IP address.

When a DHCP server is used, a new IP address is assigned each time the instru-
ment is restarted. This address must first be determined on the instrument itself.
Thus, using a DHCP server is not suitable for remote operation of the R&S

 

ESW

via Remote Desktop.

How to Set Up a Network and Remote Control

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands