manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 292

Data Management

R&S

®

ESW

292

User Manual 1177.6298.02 ─ 08

b) Use the zoom functions to make sure all relevant parts of the result display are

visible.

18. Select "Print" to execute the print function.

The selected data elements are stored to the file as configured.

12.7

 

The Notes Display

Access

:   > "Notes"

The "Notes" display is designed to add comments or explanations to the current mea-
surement.

The content of the "Notes" display can also be included in test reports, see 

Chap-

ter 12.8.2, "Creating a Test Report"

, 

on page 298.

Remote commands:

Add notes display: 

LAYout:ADD[:WINDow]?

 

on page 518

The Notes Display

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands