manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 312

General Instrument Setup

R&S

®

ESW

312

User Manual 1177.6298.02 ─ 08

Print Colors

Defines the color settings used for printout.

In addition to the predefined settings, a user-defined color set can be configured (see

"Defining User-specific Colors"

 

on page 313).

If "Show Print Colors on Display" is activated, the currently selected print colors are
displayed as a preview for your selection.

Gui setting

Description

Remote command

"Optimized Colors"

Selects an optimized color setting for the
printout to improve the visibility of the colors
(default setting). Trace 1 is blue, trace 2
black, trace 3 green, and the markers are
turquoise. The background is always printed
in white and the grid in black.

HCOP:CMAP:DEF2

"Screen Colors (Print)"

Selects the current screen colors for the
printout. The background is always printed in
white and the grid in black.

HCOP:CMAP:DEF1

"Screen Colors
(Screenshot)"

Selects the current screen colors without any
changes for a screenshot.

HCOP:CMAP:DEF4

"User Defined Colors"

Selects the user-defined color setting.

HCOP:CMAP:DEF3

Remote command: 

HCOPy:CMAP<it>:DEFault<ci>

 

on page 594

Showing Print Colors on Display

Temporarily shows the currently selected print colors on the screen display. This func-
tion can be used as a preview for printing.

Modifying User-Defined Color Assignments

You can configure the colors used to display and print individual screen objects accord-
ing to your specific requirements.

The colors are configured in the (identical) "Screen Color Setup"/"Printer Color Setup"
dialog boxes.

Selecting the Object ← Modifying User-Defined Color Assignments

Selects the object for which the color is to be defined. Colors can be defined for the
following objects:

●

Background

Display Settings

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands