manualshive.com logo in svg

Rohde & Schwarz ESW Series, User Manual

Share
Download
Rohde & Schwarz ESW Series User Manual Download Page 144

Common Measurement Settings

R&S

®

ESW

144

User Manual 1177.6298.02 ─ 08

The R&S

 

ESW opens a dialog box with several tabs. One tab each to configure the

fast access knobs, one to configure the fast access display, and tabs to configure
multimedia controllers.
You can access the fast access display via the SmartGrid  .

Note:

 The contents of the menus depend on the application you are running cur-

rently (spectrum, receiver, I/Q analyzer, analog demodulation or real-time).

2. To assign an additional function to the panel, select one of the parameters in the

left menu and move it to the right menu with the right arrow key ( ). Alternatively,
you can move items via drag & drop.
When you add a function to the knobs, the setting is added to the fast access
panel.

3. To remove a function from the panel, select one of the parameters in the right

menu and move it to the left menu with the left arrow key ( ).

4. Save the configuration to a file and restore it later on.

"File Explorer": Instead of using the file manager of the R&S

 

ESW firmware, you

can also use the Microsoft Windows File Explorer to manage files.

10.3

 

Using the User Port Panel

Access

:   > "User Port"

Using the User Port Panel

Summary of Contents for ESW Series
























































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands