Operating the Instrument
R&S
®
ESW
60
User Manual 1177.6298.02 ─ 08
Label
Information
"Frequency"
Current receiver frequency.
"75
Ω
"
75
Ω
input impedance has been selected.
"TRG"
Currently selected trigger source.
"TDF"
Currently selected transducers, including the input
they have been assigned to.
Ext. Gen
An external generator is being controlled by the
R&S
ESW (requires optional hardware).
Icons for individual settings
In the
receiver application
, a bullet next to the setting indicates that automatic set-
tings are used, not user-defined settings.
In
other applications
, a bullet next to the setting indicates that user-defined settings
are used, not automatic settings. A green bullet indicates that this setting is valid and
the measurement is correct. A red bullet indicates an invalid setting that does not pro-
vide useful results.
6.1.2
Window Title Bar
Each channel in the R&S
ESW display can contain several windows. Each window can
display either a graph or a table as a result of the channel measurement. Which type of
result evaluation is displayed in which window is defined in the display configuration
(see
Chapter 6.5, "Displaying Results"
on page 72). The window's title bar indicates
which type of evaluation is displayed.
Trace information in window title bar
Information on the displayed traces is indicated in the window title bar.
Trace color
Trace number
Detector
Trace mode
Trace color
Color of trace display in diagram
Trace no.
Number of the trace (1 to 6)
Understanding the Display Information
