Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 373 / 608

Parameter Selection of operation mode and operation location
FR-E700 SC EC/ENE 6 - 219
Specify operation mode at power on (Pr. 340)
Depending on the Pr. 79 and Pr. 340 settings, the operation mode at power on (reset) changes as de-
scribed below:
햲
The operation mode cannot be switched directly between the PU operation mode and network
operation mode.
햳
Operation mode can be changed between the PU operation mode and network operation mode
with the PU/EXT key of the operation panel and X65 signal.
Pr. 340 Pr. 79
Operation Mode
at Power on, Power Restoration, Reset
Operation Mode Switching
0
(initial
value)
0
(initial
value) External operation mode
Can be switched to external, PU or NET opera-
tion mode
햲
1 PU operation mode Fixed to PU operation mode
2 External operation mode
Can be switched to external or NET operation
mode
Switching to PU operation mode disabled
3 / 4 External/PU combined operation mode Operation mode switching disabled
6 External operation mode
Can be switched to external, PU or NET opera-
tion mode with operation continued
7
X12 (MRS) signal ON: External operation mode
Can be switched to external, PU or NET opera-
tion mode
햲
X12 (MRS) signal OFF: External operation
mode Fixed to external operation mode (Forcibly
switched to external operation mode.)
1
0 NET operation mode
Same as when Pr. 340 = 0
1 PU operation mode
2 NET operation mode
3 / 4 External/PU combined operation mode
6 NET operation mode
7
X12 (MRS) signal ON: NET operation mode
X12 (MRS) signal OFF: External operation
mode
10
0 NET operation mode
Can be switched to PU or NET operation
mode
햳
1 PU operation mode Same as when Pr. 340 = 0
2 NET operation mode Fixed to NET operation mode
3 / 4 External/PU combined operation mode Same as when Pr. 340 = 0
6 NET operation mode
Can be switched to PU or NET operation mode
with operation continued
햳
7 External operation mode Same as when Pr. 340 = 0
Tab. 6-60: Operation mode of the inverter at power on