Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 331 / 608

Parameter Frequency setting by analog input (terminal 2, 4)
FR-E700 SC EC/ENE 6 - 177
6.16 Frequency setting by analog input (terminal 2, 4)
6.16.1 Analog input selection (Pr. 73, Pr. 267)
You can select the function that switches between forward rotation and reverse rotation according to
the analog input terminal specifications and input signal.
The following settings are possible:
●
Select reference voltages and currents: 0–10 V, 0–5 V or 0/4–20 mA
●
Suppress motor reversing
The above parameters can be set when Pr. 160 "User group read selection" = 0.
Purpose Parameters that must be set
Refer to
Section
Selection of voltage/current input
(terminal 2, 4)
Perform forward/reverse rotation by
analog input. Analog input selection Pr. 73, Pr. 267 6.16.1
Adjustment (calibration) of analog
input frequency and voltage (current) Bias and gain of frequency setting voltage
(current) Pr. 125, Pr. 126,
Pr. 241, C2–C7
(Pr. 902–Pr. 905) 6.16.3
Pr. No. Name Initial Value
Setting
Range
Description Parameters referred to
Refer to
Section
73
Analog input
selection
1
0 Terminal 2: 0–10 V
Without reversible operation
125
126
C2
–
C7
Terminal 2 frequency
setting gain frequency
Terminal 4 frequency
setting gain frequency
Terminal 2 frequency
setting bias frequency
to
Terminal 4 frequency
setting gain
6.16.3
6.16.3
6.16.3
6.16.3
1 Terminal 2: 0–5 V
10 Terminal 2: 0–10 V
With reversible operation
11 Terminal 2: 0–5 V
267
Terminal 4 input
selection
0
Voltage/Current Input Switch Description
0 Terminal 4: 0/4–20 mA
1 Terminal 4: 0–5 V
2 Terminal 4: 0–10 V