Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 55 / 608

Wiring Control circuit specifications
FR-E700 SC EC/ENE 3 - 19
햴
Check the condition of the bar terminal after crimping. Do not use a bar terminal of which the
crimping is inappropriate, or the face is damaged.
햲
A bar terminal with an insulation sleeve compatible with MTW wire which has a thick wire insu-
lation
햳
Applicable for terminal ABC
I001985E
Fig. 3-10: Incorrectly crimped bar terminals
Wire Size [mm²]
Bar Terminal Model
Bar Terminal
Crimping Tool
With
Insulation Sleeve
Without
Insulation Sleeve
For UL Wire
햲
0.3 AI 0,34-10TQ
—
—
CRIMPFOX 6
0.5 Al 0.5-10WH AI 0.5-10WH-GB
0.75 Al 0.75-10GY A 0.75-10 AI 0.75-10GY-GB
1 Al 1-10RD A 1-10 AI 1-10RD/1000GB
1.25/1.5 Al 1.5-10BK A 1.5-10 AI 1.5-10BK/1000GB
햳
0.75 (for two cables) Al-TWIN 2 × 0.75-10GY — —
Tab. 3-12: Recommended bar terminals (Maker: Phoenix Contact Co., Ltd, as of Jan. 2017)
Wire Size [mm²] Blade Terminal Poduct Number Insulation Product Number
Bar Terminal
Crimping Tool
0.3 to 0.75 BT 0.75-11 VC 0.75 NH 69
Tab. 3-13: Recommended bar terminals (Maker: NICHIFU Co., Ltd, as of Jan. 2017)
Damaged
Crumpled tip
Wires are not inserted
into the shell
Unstranded wires