Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 297 / 608

Parameter Monitor display and monitor output signals
FR-E700 SC EC/ENE 6 - 143
쑶
NOTES
By setting "0" in Pr. 52, the monitoring of output speed to alarm display can be selected in
sequence by the SET key.
When the operation panel is used, the displayed units are Hz and A only and the others are not
displayed.
The monitor set in Pr. 52 is displayed in the third monitor position. However, change the output
current monitor for the motor load factor.
The monitor displayed at powering on is the first monitor. Display the monitor to be displayed on
the first monitor and press the SET key for 1 s. (To return to the output frequency monitor, hold
down the SET key for 1 s after displaying the output frequency monitor.)
I001800E
Fig. 6-68: Displaying various types of monitor
Example
쑴
When Pr. 52 is set to "20" (cumulative energizing time), the monitor is displayed on the operation
panel as described below.
I001801C
Fig. 6-69: Selection of the third monitor
Power on monitor (first monitor) Second monitor Third monitor Alarm monitor
Output frequency Output current Output voltage
With
fault
Power on monitor (first monitor) Second monitor Third monitor Alarm monitor
Output frequency
Output current
Cumulative energizing time
With
fault