Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 56 / 608

Control circuit specifications Wiring
3 - 20
햵
Insert the wire into a socket.
햶
When using a single wire or a stranded wire without a bar terminal, push an open/close button
all the way down with a flathead screw driver, and insert the wire.
Fig. 3-11:
Cable connection
I001986E
Fig. 3-12:
Connection of a stranded wire
I001987E
E
CAUTION:
●
When using a stranded wire without a bar terminal, twist enough to avoid short circuit with
a nearby terminals or wires.
●
During wiring, pulling out the wire forcefully without pushing the open/close button all the
way down may damage the terminal block.
●
Place the flathead screwdriver vertical to the open/close button. In case the blade tip slips,
it may cause to damage of inverter or injury.
Open/close button
Flathead screwdriver