Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 298 / 608

Monitor display and monitor output signals Parameter
6 - 144
Display set frequency during stop (Pr. 52)
When "100" is set in Pr. 52, the set frequency and output frequency are displayed during stop and op-
eration respectively. (LED of Hz flickers during stop and is lit during operation.).
햲
The set frequency displayed indicates the frequency to be output when the start command is
on. Different from the frequency setting displayed when Pr. 52 = "5", the value based on maxi-
mum/minimum frequency and frequency jump is displayed.
Parameter 52
0 100
During Running/Stop During Stop During Running
Output frequency Output frequency Set frequency
햲
Output frequency
Output current Output current
Output voltage Output voltage
Alarm display Alarm display
Tab. 6-36: Display during running and stop
NOTES During an error, the output frequency at error occurrence appears.
During MRS, the values displayed are the same as during a stop.
During offline auto tuning, the tuning status monitor has priority.