Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 101 / 608

Operation Operation panel
FR-E700 SC EC/ENE 4 - 9
Key Function Description
Digital dial
Used to change the frequency setting and parameter values.
Press to display the following.
앫
Displays the set frequency in the monitor mode
앫
Currently set value is displayed during calibration
앫
Displays the order in the faults history mode
Rotation direction
RUN command for forward/reverse rotation.
The rotation direction can be selected by setting Pr. 40.
Stop operation/
Fault reset
앫
Used to stop RUN command.
앫
Fault can be reset when protective function is activated (fault).
Mode switch over
Used to change each setting mode.
앫
Pressing PU/EXT simultaneously changes the operation mode (refer
to section 4.3.3).
앫
Pressing for a while (2 s) can lock operation (refer to section 4.3.4).
Write settings
If pressed during operation, monitor changes as below:
Operation mode
switch over
Used to switch between the PU and external operation mode. When
using the external operation mode (operation using a separately con-
nected frequency setting potentiometer and start signal), press this key
to light up the EXT indication. (Press MODE simultaneously (0.5 s) or
change Pr. 79 setting to change to combined mode.)
PU: PU operation mode
EXT: External operation mode (Cancels PU stop also.)
Tab. 4-3: Keys of the operation panel
Running
frequency
Output
current Output
voltage