Mitsubishi Electric fr-e700 series, Instruction Manual

Page: 290 / 608

Function assignment of external terminals Parameter
6 - 136
When you refer to fig. 6-65 and set "1" to the terminal bit (terminal where the REM signal has been as-
signed) of Pr. 496 or Pr. 497, the output terminal turns on (off for sink logic). By setting "0", the output
terminal turns off (on for sink logic).
햲
As desired (always "0" when read).
햳
Y0 to Y6 are available only when the extension output option (FR-A7AY-Ekit-SC-E) is fitted.
햴
RA1 to RA3 are available only when the relay output option (FR-A7AR-Ekit-SC-E) is fitted.
Example
쑴
When "96" (source logic) is set to Pr. 190 "RUN terminal function selection" and "1" (H01) is set to Pr.
496, the terminal RUN turns on.
쑶
I001799E
Fig. 6-65: Remote output data
Pr. 496
Pr. 497