Mitsubishi Electric 3F-14C-WINE, User Manual, Page: 634 / 646

27-634 27-634
Check item or cause Solution
Do the communications settings in this
software and on the robot controller match? The communications settings in this software and on the
robot controller must match.
The communications settings for this software are made
on the project edit screen. For details, see
"9.2
Connection Settings" .
For the robot controller side, change the
communications parameters with the optional teaching
box. For details, see
"Detailed explanations of
functions and operations" in the robot controller user's
manual.
(6)
When Communication Server 2 is yellow (overall)
When Communication Server 2 is displayed in yellow, check the following.
Check item or cause Solution
Is this software in the "Online" status? This software initially starts in the "Offline" status. When
you put it into "Online" status, it communicates with the
robot controller.
For details, see
"8.18 Offline/Online/Simulation" .
(7)
When Communication Server 2 is in light blue or blue (overall)
If Communications Server 2 is displayed light blue or blue, but communications are still not possible, check
the following.
Check item or cause Solution
Is there a communications error in this
software? Check the contents of the communications error and
close the communications error window.
Is a simulation underway?
(Note) Only the standard edition has the
simulation function. End the simulation.
Is the screensaver running on the
computer? Close the computer's screensaver.
Is the computer's hard disk is power save
mode? Close computer hard disk power save mode setting.
(8)
Communication with the robot controller is cut off mid-way through.
If you cannot communicate with the robot controller, check the following.
Check item or cause Solution
Is the screen saver set, hard disk power off
set, system standby set, or system
shut-down set? If any of these functions are running, they may cause a
communications time-out, so do not use any of these
functions.
Is some other product running that uses
communication?
Or is any permanent resident software
running that uses communication? A computer communication port cannot be opened for
two applications, so either close the other application or
change the port that this software uses.