Mitsubishi Electric 3F-14C-WINE, User Manual

Page: 285 / 646

14-285 14-285
(2) Display format
The value displayed in variable monitor, signal monitor, and register monitor can be switched.
Table 14-3 Change display of variable monitor, signal monitor, register monitor
Variable
monitor
Integer
The displayed variable can be switched between hexadecimal / unsigned
decimal / signed decimal.
Real
It is possible to switch between hexadecimal / signed decimal if 0 under the
decimal point.
However, the value can only be displayed within a range of -9999999 -
9999999.This will be displayed as a floating point if this range is exceeded.
String Can not switch display.
Position
Data Switching display is not performed for both orthogonal / joint / work
coordinate
Signal
The displayed variable can be switched between hexadecimal / unsigned
decimal / signed decimal.
Register
The displayed variable can be switched between hexadecimal / unsigned
decimal / signed decimal.
As for the value displayed by the hexadecimal number, “&H” is added to the head of the value.
(3) Signal check box
Display / non-display of signal monitor by ON / OFF of check box.
(4) Register check box
Display / non-display of Register monitor by ON / OFF of check box.
Register check box is not displayed if option card is not installed.
(5) Variable monitor:
You can check the names of variables being used in the selected program. You can select the variables to
monitor with the buttons displayed at the bottom of the screen.
(6) Adding variables
This adds more variables to monitor.
Figure 14-5 Add Variables
A dropdown list
is displayed.
Move to the variable
name that matches the
input character