Mitsubishi Electric 3F-14C-WINE, User Manual, Page: 288 / 646

14-288 14-288
(13) Signal setting
The start number of input signal and output signal can be set within the range of 0 to 32703.
(14) Signal monitor
You can check the signal input from the external device to the robot controller or the state of the signal output
to the external device.
Pseudo input and forced output of bits can be performed by double clicking on the signal list.
Figure 14-9 Double click pseudo input
Figure 14-10 Double click forced output
(15) Register setting
The start register of input register and output register can be set within the range of 6000 to 6496.
(16) Register monitor
You can check the register value input from the external device to the robot controller or the state of the
register value output to the external device.
At the end of the screen, the set display format, variables, signal number, register number are automatically
saved and reflected at the next display.
The setting contents are saved for each task slot.
Double click
Double click