Mitsubishi Electric 3F-14C-WINE, User Manual

Page: 123 / 646

11-123 11-123
11.4. Ribbon During Program Editing
During program editing the "File", "Edit", "Debug" and "Tool" tabs are displayed on the ribbon.
Figure 11-9 Ribbon During Program Editing
The button in each of these tabs are as follows.
Tab Group Button Explanation Menu
item
Home
Print Page Setup Pages in the program to print can be customized. 11.10.3
Print
preview You can preview how a printed page of the program
will look. 11.10.1
Print This prints the program. 11.10.2
File
Save Save Saves the program being edited with its current
name. 11.9.1
Save As ->
PC... Saves the program being edited with its current
name on the PC 11.9.2
Save As ->
Robot... Saves the program being edited with its current
name on Robot controller 11.9.3
Save As ->
Template Save the editing program as a template to PC 11.9.4
Program template Insert/Edit It is possible to insert template to editing program
and edit template 11.7.4.1
5
Edit
Command line Cut Cuts a character string from the command being
edited. 11.7.4.2
Copy Copies a character string in the command being
edited. 11.7.4.1
Paste Pastes the copied or cut character string to the
specified location. 11.7.4.3
Undo Cancels the command edit and return to the
previous state
Redo Redo the command edit
Syntax
Check You can check whether or not the edited robot
program is syntactically correct. 11.7.4.13
Template You can display a list of the commands and make
insertions on the program command edit screen. 11.7.4.14
Jump Jumps to the specified step number or label. 11.7.4.9