Mitsubishi Electric 3F-14C-WINE, User Manual

Page: 158 / 646

11-158 11-158
11.7.4.19. Comment Selection/Uncomment Selection
The selected lines are exchanged as a comment by the batch. Or the comments in the selected lines are removed
comment by the batch.
In the command edit area, select the line to output comments from, and click the [Edit] tab -> [Comment] group ->
[Comment] button on the ribbon. Comment character “’ “is added to the head of the selected lines.
You can remove a comment from a selected line by selecting the line to remove the comment from, and clicking the
[Edit] tab -> [Comment] group -> [Uncomment] button on the ribbon. However, even if you select the line where
"Rem" command is included, "Rem" is not removed.
Figure 11-54 Comment Selection / Uncomment Selection
Example for setting / removing of comment is as follows;
Table 11-5 Example for setting / removing comment
program language Set comment Remove comment
MELFA-BASIC V
MELFA-BASIC VI
Movemaster
command
MELFA-BASIC IV
Comment Selection
Uncomment Selection
Cautions for comment setting/release in programs opened in
debugging status
When the program is opened in debugging status, it is written to the robot controller as soon as
the comment is set or removed. If continuous execution is underway, or the robot controller is
running, an error will be generated.
Caution