Mitsubishi Electric 3F-14C-WINE, User Manual

Page: 125 / 646

11-125 11-125
Tab Group Button Explanation Menu
item
Start/Stop Debug start Reopens the program being edited in the debug
mode. 11.11.1
Debug stop Reopens the program in the debug mode in an
editable state. 11.11.6
Breakpoint Set... Sets a breakpoint in a program opened in
debugging status. 11.11.4
Delete Deletes a breakpoint in a program opened in
debugging status.
Delete all Deletes all breakpoints in a program opened in
debugging status
Show Show the
executed
line always Sets display/non-display the executed line in the
program opened in debugging status. 11.11.1
Tool
*
Command line
Renumber The renumbering function can only be used with
MELFA-BASIC IV and Movemaster commands.
Batch-renumbers line numbers. 11.7.4.17
Sort The sorting function can only be used with
MELFA-BASIC IV and Movemaster commands.
Sorts edited programs in line number order. 11.7.4.18
Position variable
Batch edit XYZ
variable Changes the position variables in the program being
edited in a batch and can sum up all the values 11.7.4.16
Joint
variable
Work
coordinate
variable
Tact time
Calculation Run
calculation Tact time calculation can only be used in a
simulation.
You can calculate the tact time of the program. 20.3
Other Option You can customize the syntax check before saving
for example. 11.6
* When the program is opened in the debug mode, the [Tool] tab is not displayed.