Delta DVP-15MC Series, Operation Manual

Page: 904 / 972

DVP-15MC Series Motion Controller Operation Manual
12-26
12
1
System error code
Explanation Correction
Hexadecimal Decimal
current PLC. file is the same as that of the current PLC.
5000 20480
Extension communication
checking failed.
Contact local technicians if the error still exists
after repower on.
5001 20481 Extension communication timeout
5100 20736
The module actually connected is
inconsistent with that configured in
the software.
Make sure that the module acutally connected
to the right side of the PLC is consistent with
that configured in the software and then re-
download the configuration.
5200 20992
The buffer for receiving CANopen
data is full.
Adjust the CANopen configuration and check
the task setup.
5201 20993
The buffer for sending CANopen
data is full.
5300 21248
The buffer for receiving Motion
data is full.
Adjust the Motion configuration and check the
task setup.
5301 21249
The buffer for sending Motion
data is full.