Delta DVP-15MC Series, Operation Manual

Page: 251 / 972

DVP-15MC Series Motion Controller Operation Manual
8-164
_8

The Bit-string data are converted into the String data as the following table shows.
Data type The value of In corresponds to the value of Out
In Out In Out
BYTE STRING 16#00~16#FF ‘00’~’FF’
WORD STRING 16#0000~16#FFFF ‘0000’~’FFFF’
DWORD STRING 16#0000_0000~16#FFFF_FFFF ‘00000000’~’FFFFFFFF’
LWORD STRING
16#0000_0000_0000_0000~
16# FFFF_FFFF_FFFF_FFFF ‘0000000000000000’~
‘FFFFFFFFFFFFFFFF’
When the Bit-string data are converted to the String data, the length of the output String data must
meet the length of the input parameter. For example, during the use of the BYTE_TO_STRING
instruction, the output String data must contain more than 2 characters. Otherwise, an error will
occur during the compiling of the software.

Precautions for Correct Use
The input variable is not allowed to omit. An error will occur during the compiling of the software if the
input variable is omitted. But the output variable is allowed to omit.
BY TE _TO _STRING
EN ENO
Ou t In
WORD_TO_STRING
EN ENO
O ut In
DWO RD_ TO _STRING
EN ENO
O ut In
LWO RD_TO_ STRI NG
EN ENO
O ut
In