Suzuki 2006 SX4, Service Manual

Page: 433 / 1478

Drive Shaft / Axle: Front 3A-8
• When installing left oil seal (1) and right oil seal (2)
using special tool, use care so that oil seals in proper
direction and position as shown in figure.
Special tool
: 09925–15410
Distance
A/T model
“a”: 0 – 1 mm (0 – 0.04 in.)
“b”: 11 – 12 mm (0.43 – 0.47 in.)
M/T model
“a”: 6 – 7 mm (0.24 – 0.35 in.)
“b”: 2 – 3 mm (0.08 – 0.12 in.)
• Be sure to apply grease to oil seal lip and bearing side
space indicated in figure.
“A”: Grease 99000–25011 (SUZUKI Super Grease
A)
• Press-fit center shaft (1) from left oil seal (2) side.
Specifications
Tightening Torque Specifications
S6RW0C3117001
NOTE
The specified tightening torque is also described in the following.
“Front Drive Shaft Assembly Components Location”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
[A]: A/T model [B]: M/T model
[A]: A/T model [B]: M/T model
I7RW01311007-02
I7RW01311008-03
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Brake hose mounting bolt 25 2.5 18.0
)