Suzuki 2006 SX4, Service Manual

Page: 847 / 1478

Power Assisted Steering System: 6C-45
Specifications
Tightening Torque Specifications
S6RW0C6307001
NOTE
The specified tightening torque is also described in the following.
“Steering Gear Case Assembly Components”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
Special Tools and Equipment
Recommended Service Material
S6RW0C6308001
NOTE
Required service material is also described in the following.
“Steering Gear Case Assembly Components”
Special Tool
S6RW0C6308002
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
Tie-rod end nut 45 4.5 32.5 )
Tie-rod end lock nut 45 4.5 32.5 )
Wheel bolt 85 8.5 61.5 )
Steering gear case mounting bolt 70 7.0 51.0 )
Steering lower shaft assembly upper joint bolt 25 2.5 18.5 )
Steering lower shaft assembly lower joint bolt 25 2.5 18.5 )
Tie-rod 75 7.5 54.5 )
Earth cable bolt 4.0 0.4 2.8 )
Rack damper screw Tighten 25 N
⋅
m (2.5 kgf-m, 18.0 lb-ft) and
loosen 180
°
and then tighten 3.9 N
⋅
m (0.39
kgf-m, 3.0 lb-ft) and turn it back by 10
°
or
less by the specified procedure.
)
Rotation torque of pinion 2.2 0.22 1.5 )
Steering rack damper lock nut 60 6.0 43.5 )
Material SUZUKI recommended product or Specification Note
Grease SUZUKI Super Grease E P/No.: 99000–25050 )
Water tight sealant SUZUKI Bond No.1207F P/No.: 99000–31250 )
09944–18220 SUZUKI scan tool
Pinion torque checking
socket —
) This kit includes following
items. 1. Tech 2, 2. PCMCIA
card, 3. DLC cable, 4. SAE
16/19 adapter, 5. Cigarette
cable, 6. DLC loop back
adapter, 7. Battery power
cable, 8. RS232 cable, 9.
RS232 adapter, 10. RS232
loop back connector, 11.
Storage case, 12.
) / )