Suzuki 2006 SX4, Service Manual

Page: 999 / 1478

Air Bag System: 8B-34
DTC B1032: Driver Air Bag Circuit Low Resistance
S6RW0C8204019
Wiring Diagram
Refer to “DTC B1031: Driver Air Bag Circuit High Resistance”.
DTC Detecting Condition and Trouble Area
DTC Troubleshooting
DTC detecting condition Trouble area
Driver air bag circuit is less than 1.1
Ω
for more than 4
sec.
• Driver air bag circuit
• Contact coil assembly
• Driver air bag module
• SDM
Step Action Yes No
1 Was “Air Bag Diagnostic System Check Flow” performed? Go to Step 2. Go to “Air Bag
Diagnostic System
Check Flow”.
2 Driver air bag circuit check
1) With ignition switch turned OFF, disconnect contact coil
connector located under the steering column.
2) Check for proper connection to contact coil at terminal in
“G347” connector.
3) If OK, then connect special tools (A) and (B) to “G347”
connector disconnected in Step 1).
Special tool
(A): 09932–75010
(B): 09932–78340
4) Check SDM for DTC.
With ignition switch turned ON, is DTC B1032 indicated?
Go to Step 3. Go to Step 5.
BASE OF COLUMN BASE OF COLUMN
“G347”
(A)
(B)
DRIVER
PASSENGER
I7RW01821018-02